High Precision Lithium Battery Spot Welding Machine Electric Welding
Equipment introduction
● Cheebo lithium battery spot welding machine adopts self-developed precision welding head with accurate pressure adjustment.
● CBLQ-5A battery nickel welding machine does not need to welding transformer, small size, light weight, beautiful.
● According to the welding requirements, convex point welding and pointed needle welding can be selected.
● 18650 battery spot welding machine has three control modes: constant current, constant pressure, constant current and constant
pressure combination mode.
● The built-in precheck function can be used to determine whether the workpiece is energized before welding.
● The welding current of the lithium battery spot welding machine can be quickly switched through the transistor, without a transformer.
● Welding power supply is controlled by switch, which can realize small and efficient welding with high yield.
● Power supply welding current rises quickly, and high-quality welding can be realized in a short time.
● Lithium-ion battery pack spot welding machine increases the function of continuous spot welding, and effectively improves the
production efficiency.
● Independent research and development of precision welding head, accurate pressure regulation and control.
● Microcomputer technology control, dynamic real-time monitoring of welding current, voltage, power and resistance waveform.
● 5.7-inch hd LED display, equipment parameters adjustment intuitive, can store multiple programs in advance.
● There are three combinations of constant voltage, constant current and constant voltage current.
Device action flow description
Power on - Check if the WELED switch is turned on - Turn on the motion control system power - Welding head action - Find the origin position -
Place the product that needs to be welded on the desktop - Step on the foot pedal - Welding head pressing down - Welding head completed -
Welding head returning to its original position
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Electric | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Function Introduction
1. Transistor welding power supply
Welding energy output is the most stable power source, displaying real-time welding voltage and current waveforms. The current rises quickly and can achieve high-quality welding in a short period of time.
2. Electric control
No additional air source, low noise, fast welding speed, stable pressure.
3. Thick cable
Thick pure copper cable, low resistance wire, large carrying capacity, thick enough, welding no heat current no loss transmitted to the welding head, to ensure welding current.
-
Welding case
FAQ
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can provide you with advice.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication will be adopted to solve the problem first. Door-to-door service can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the best quality service throughout the process!!!
Product Tags:
|
|
High Precision Lithium Battery Spot Welding Machine Electric Welding Images
|
